10 Step Guide to Using Flash in Sunlight


Really good summary of how to use flash in sunlight.

Originally posted on Photofocus:

In the shot above I used a single 400Ws flash pack and head. I fitted a 28cm high efficiency reflector and lit my model from a distance of five metres. The pack was an Elinchrom Quadra and it was flat out on full power. Full length pictures require more flash power than close ups because the light has to cover a wider area.


Clouds make a wonderful real life back drop. I lit Chloe with a Speedlight zoomed into 105mm, rigged four metres away and switched to full power.

Here are my steps to producing repeatable results on sunny f/16 days using manual control flash.

Things you will need: A loupe
Things you won’t need: A light meter

The 10 steps

1. Set the camera’s shutter speed to the highest sync value.

2. Set the ISO to the lowest value without compromising tonal range. Don’t use the L values for…

View original 1,166 more words

About these ads

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s